The following are the general safety code to be followed:-
(a) Not to fly model aircraft in competition or the presence of spectators until it has been proven to be airworthy by having been previously successfully flight-tested.
(b) Not to fly model aircraft higher than approximately 400 feet within 3 miles of an airport without notifying the airport operator.
(c) Give right of way to, and avoid flying in the proximity of full-scale aircraft. Where necessary an observer shall be utilized to supervise flying to avoid having models fly in the proximity of full-scale aircraft.
(d) Where established, abide by the safety rules for the flying site and willfully and deliberately not to fly my models in a careless, reckless, and/or dangerous manner.
(e) Only after completed a successful radio equipment ground range check before the first flight of a new or repaired model.
(f) While flying the model the initial turn after takeoff away from the pit, spectator, and parking areas, and thereafter perform maneuvers, flights of any sort, or landing approaches over a pit, spectator, or parking area.
(g) Complete control system (including safety thong, where applicable) will be inspection and pull test prior to flying.
(h) Flying area should be clear of all utility wires or poles.